RH15E06XW

It adopts high precision CNC metal assemble with high end aesthetics and superior flight performance.

RH15E06XW

Adopt industrial rich-fiber PA material improves the strength and hardness by three times over the original. The new material increases the thickness of the frame structure, reduces warpage, and abrasion while improving impact resistance.

 
RH15E06XW

4G digital micro servos are specially design for the T-REX 150X to increase micro helicopter control speed, precision, and torque output.

RH15E06XW

150X all metal CNC CCPM swashplate adopts specific embedded technology for fixing bearings, improves the structure strength, and zero slop. The swashplate can withstand 40kg of tension which significantly enhances its durability and lifetime.

 
RH15E06XW

Main motor KV value is increased to 9000KV to deliver outstanding power, torque, and high efficiency with low power consumption delivering outstanding performance. The tail motor provides superior tail authority out performing all other micro heli's on the market.

RH15E06XW

The new upgraded anti-impact nylon skids improve its toughness, providing the ability to withstand any hits or impacts!

 
RH15E06XW

The Li-po battery uses a series/balancing design, resulting in efficiency and high discharge capabilities due to machine inspection to match cells.

RH15E06XW

To deliver outstanding flight performance the main blades are manufactured with high-strength industrial fiber composite material with an added aluminum sleeve to decrease torsional stress, and improving durability.

 
RH15E06XW

New tail motor plug mount makes maintenance easy.

RH15E06XW

For ease of control the T-REX 150 is equipped with Attitude Mode. Enable Attitude Mode to avoid flip overs during flight. Flip a switch takes over to keep the heli at a level position. These new features make learning to fly more enjoyable, allowing you to practice more flight maneuvers, speeds your ability to learn, and boost flying skills. Fly with Confidence!

 

Standard equipment

●150 Main Blades x 1 Set
●150M Main Motor(9000KV/1107) x 1
●150M Tail Motor(8000KV/1103) x 1
●DS155 Digital Servo x 1
●DS150 Digital Servo x 2
●150 Tail Blades x 1
●150 Remote Extension x 1
●7.4V 250mAh/30C x 1
RH15E06XW






Specification

● Length: 255mm
● Height: 80mm
● Main Blade Length: 120mm
● Main Rotor Diameter: 271mm
● Tail Rotor Diameter: 45mm
● Motor Pinion Gear: 10T
● Main Drive Gear: 78T
● Drive Gear Ratio: 1:7.8
● Weight(Without Battery): 55g

Accessories

●T-REX 150 DFC set x 1
●Main Blades x 1 set
●Tail Blades x 1 set
●150M Main Motor(9000KV/1107) x 1
●150M Tail Motor(8000KV/1103) x 1
●DS155 Digital Servo x 1
●DS150 Digital Servo x 2
●Remote Extension x 1
●7.4V Li-Po 250mAh Li-Polymer Battery x 1


Radio transmitter and electronic equipment required for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter. For the use of JR and Spektrum system, require JR DSM2/DMSS, Spektrum DSM2/DSMX 2.4GHz Transmitter and Satellite.